Luxtella | Hanging LED light | Luxtella
Hanging light for street or wire hanging street light can also be used inside building where attachment of light is not set. With steel wire attached to it this light is made for IP66 environment suitable for outside and inside application.
16111
page-template,page-template-full_width,page-template-full_width-php,page,page-id-16111,ajax_fade,page_not_loaded,,qode-title-hidden,qode-theme-ver-10.1.1,wpb-js-composer js-comp-ver-5.0.1,vc_responsive

Electrical characteristics

  • 220 – 240 V (50 – 60 Hz) input
  • 110 – 277 V input voltage range upon request
  • Power factor at full load more than 0,95
  • Total harmonic distortion (THD) ≤ 8%
  • Up to 99 % driver efficiency at full load with the Philips Xitanium LED driver
  • Dimming options: Lumistep, Line switch, DALI, 1 – 10 V and Dynadimmer       (autonomous dimming) upon request
  •  6 kV differential mode and 8 kV common mode standard surge protection.10 kV surge protection upon request
  •  Protection class I or II

Mechanical characteristics

  • Housing made of aluminium
  • Hanging connector is designed for metal wires diameter from 4 – 12 mm
  • Possibility to change Inclination and to rotate the lamp for 360°
  • Equipped with connecting electrical cable 8 m, longer/shorter cables upon request
  • Finish made of anodisation and dust painted with epoxy paint thermal treatment to ensure long-term environmental protection against all weather conditionds. RAL 9006 or on upon request
  • All screws are made of stainless steel
  • All gaskets are made of ozone and UV resistant silicone for IP66 protection
more characteristics about leds

Optical characteristics

  • Standardly we are using PMMA that is 100% UV resistant which prevents against yellowing over the entire life time of the lenses.
  • Polycarbonate lenses ensure high impact resistance.
  • Photometric files are available upon request.
Optic B (with XTE LEDs)
Optimised for ME and S road classes and narrow roads (IESNA TYPE II)
Pole height 4 – 6m, pole spacing from 20 – 30m (S classes), and height from 7 – 12m, spacing from 30 – 40m (ME classes)

 

Optic H (with XPL and XTE LEDs)
Optimised for ME road classes and wider roads (IESNA TYPE III)
Pole height from 7 – 12m, pole spacing from 25 – 45m

 

Optic D (with XPL and XTE LEDs)
Optimised for S road lighting classes with narrow roads (IESNA TYPE II/III)
Pole height from 4 – 8m, pole spacing from 25 – 45m

*upon request available also modified optics C without back spill light

Optic O (with XPL LEDs)
Wide beam optics (IESNA TYPE II) optimised for long pole distances, pedestrian & bike paths
Pole height from 4 – 9m, pole spacing from 30 – 55m
 

Optic M (with XPL LEDs)
Forward-throw beam optics (IESNA TYPE IV) optimised for wide outdoor areas and parking lots
Pole height from 6 – 12m, pole spacing from 15 – 25m