luxtella | Industrial Light
16077
page-template,page-template-full_width,page-template-full_width-php,page,page-id-16077,ajax_fade,page_not_loaded,,qode-title-hidden,qode-theme-ver-10.1.1,wpb-js-composer js-comp-ver-5.0.1,vc_responsive

Electrical characteristics

  • 220 – 240 V (50-60 Hz) input
  • 110 – 277 V input voltage range upon request
  • Power factor at full load more than 0,95
  • Total harmonic distortion (THD) 8%
  •  Up to 99 % driver efficiency at full load with the Philips Xitanium LED  driver
  • Dimming options: Lumistep, Line switch, DALI, 1-10 V and Dynadimmer (autonomous dimming) upon request
  • 6 kV differential mode and 8 kV common mode standard surge protection. 10 kV surge protection upon request
  • Protection class I or protection class II
  • Upon request we can program our lamps for DALI smart lighting and supply additional switches, sensors, etc.

Mechanical characteristics

  • Housing made of casted and extruded aluminium
  • As a standard equipped with 3 m connecting
    electrical cable, other lengths are available upon
    request
  • Finish made of anodisation and dust painted with epoxy paint thermal treatment to ensure long term protection against all weather conditions. RAL 9006 or other upon request
  • All screws are made of stainless steel
  • All gaskets are made of ozone and UV resistant  silicone for IP66 protections (Flexible ceiling connector is IP61). IK10 impact resistance
  • There are 3 types of fixation: low ceiling connector, flexible ceiling connector and hooks for chain fixation
more characteristics about leds

Optical characteristics

  • Standardly we are using PMMA that is 100% UV resistant which prevents against yellowing over the entire life time of the lenses.
  • Polycarbonate lenses ensure high impact resistance.
  • Photometric files are available upon request.
Optic I, 95% optical efficiency, 67deg viewing angle

Narrow symmetrical beam, suitable for very high installations

Luminaire installation height: 10 meters

Number of luminaires: 50 pcs

Luminaire wattage: 62 W

Avg. illuminance at floor level: ≈300 lx

Illuminance uniformity on

the floor level (u0): typical 0,39

Total power consumption: 3,1 kW (≈2,36 W/m²)

 

 

Optic J, 92% optical efficiency, 103 deg viewing angle

Wide symmetrical beam, suitable also for lower installations heights

Luminaire installation height: 6 meters

Number of luminaires: 32 pcs

Luminaire wattage: 92 W

Avg. illuminance at floor level: ≈300 lx

Illuminance uniformity on

the floor level (u0): typical 0,41

Total power consumption: 2,94 kW (≈2,36 W/m²)

 

 

Optic K, 91% optical efficiency, 63 / 115 deg viewing angle

Aisle asymmetrical beam, suitable to illuminate isles between warehouse racks and corridors.

Luminaire installation height: 8m

Luminaire spacing: 8.3m                   

Number of luminaires: 6pcs           

Shelf height: 6m

Distance between shelves: 2m

Luminaires are installed in the aisle:Centreline

Fixture luminous flux: 3000 lm

Eav: 38 lx, Emin: 32 lx, Emax: 41 lx u0: 0.839