luxtella | Stadium Light
16383
page-template,page-template-full_width,page-template-full_width-php,page,page-id-16383,ajax_fade,page_not_loaded,,qode-title-hidden,qode-theme-ver-10.1.1,wpb-js-composer js-comp-ver-5.0.1,vc_responsive

Electrical characteristics

  • 220 – 240 V (50 – 60 Hz) input
  • 110 – 277 V input voltage range upon request
  • Power factor at full load more than 0,95
  • Total harmonic distortion (THD) ≤ 8%
  • Up to 94 % driver efficiency at full load with the Philips Xitanium LED driver
  • Dimming options: Lumistep, Line switch, DALI, 1 – 10 V and Dynadimmer
    (autonomous dimming) upon request
  •  6 kV differential mode and 8 kV common mode standard surge protection.10 kV surge protection upon request
  •  Protection class I or II

Mechanical characteristics

  • Housing made of aluminium
  • Top pole or side entry. As a standard equipped with a 60 mm pole connector, 76 mm also available
  • Possibility to change the inclination from -15° up to +15° in increments of 5°
  • As a standard equipped with a 0,5 m connecting cable, or longer cable upon request
  • All screws are made of stainless steel
  • All gaskets are made of ozone and UV resistant silicone for IP66 protection
  • Certified for IK10
  • Tool – less opening
  • Tempered cover glass 4mm
more characteristics about leds

Optical characteristics

  • Standardly we are using PMMA that is 100% UV resistant which prevents against yellowing over the entire life time of the lenses.
  • Polycarbonate lenses ensure high impact resistance.
  • Photometric files are available upon request.
Optic A (with XTE LEDs)
Optimised for ME and S road classes and narrow roads (IESNA TYPE II)
Pole height 4 – 6m, pole spacing from 20 – 30m (S classes), and height from 7 – 12m, spacing from 30 – 40m (ME classes)

 

Optic G (with XPL and XTE LEDs)
Optimised for ME road classes and wider roads (IESNA TYPE III)
Pole height from 7 – 12m, pole spacing from 25 – 45m

 

Optic C (with XPL and XTE LEDs)
Optimised for S road lighting classes with narrow roads (IESNA TYPE II/III)
Pole height from 4 – 8m, pole spacing from 25 – 45m

 

*upon request available also modified optics C without back spill light

Optic N (with XPL LEDs)

 

Wide beam optics (IESNA TYPE II) optimised for long pole distances, pedestrian & bike paths

 

Pole height from 4 – 9m, pole spacing from 30 – 55m

Optic L (with XPL LEDs)

 

Forward-thrown beam optics (IESNA TYPE IV) optimised for wide outdoor areas and parking lots

 

Pole height from 6 – 12m, pole spacing from 15 – 25m