Luxtella | T Lamp | Luxtella
T lamp is a symmetric street light with 2 heads shinning equivalently left and right. This lamp is suitable for parks, parking spaces or parking lots where lights need to light wider areas. This T lamp can also be used for roads which have lights positioned in the middle of the road and shining both left and right thereby saving additional lamp port required.
16126
page-template,page-template-full_width,page-template-full_width-php,page,page-id-16126,ajax_fade,page_not_loaded,,qode-title-hidden,qode-theme-ver-10.1.1,wpb-js-composer js-comp-ver-5.0.1,vc_responsive

Electrical characteristics

  • 110 – 277 V input voltage range upon request
  • Power factor at full load more than 0,95
  • Total harmonic distortion (THD) ≤ 8%
  • Up to 99 % driver efficiency at full load with the Philips Xitanium LED driver
  • Dimming options: Lumistep, Line switch, DALI, 1 – 10 V and Dynadimmer       (autonomous dimming) upon request
  •  6 kV differential mode and 8 kV common mode standard surge protection.10 kV surge protection upon request
  •  Protection class I or II

Mechanical characteristics

  • Housing made of aluminium
  • Lamp is equiped with 60mm pole connector
  • Equiped with connecting electrical cable 0,5m, longer cables upon request
  • Finish made of anodisation and dust painted with epoxy paint thermal treatment to ensure long-term environmental protection against all weather conditionds. RAL 9006 or on upon request
  • All screws are made of stainless steel
  • All gaskets are made of ozone and UV resistant silicone for IP66 protection
more characteristics about leds

Optical characteristics

  • Standardly we are using PMMA that is 100% UV resistant which prevents against yellowing over the entire life time of the lenses.
  • Polycarbonate lenses ensure high impact resistance.
  • Photometric files are available upon request.
Optic B (with XTE LEDs)
Optimised for ME and S road classes and narrow roads (IESNA TYPE II)
Pole height 4 – 6m, pole spacing from 20 – 30m (S classes), and height from 7 – 12m, spacing from 30 – 40m (ME classes)

 

Optic H (with XPL and XTE LEDs)
Optimised for ME road classes and wider roads (IESNA TYPE III)
Pole height from 7 – 12m, pole spacing from 25 – 45m

 

Optic D (with XPL and XTE LEDs)
Optimised for S road lighting classes with narrow roads (IESNA TYPE II/III)
Pole height from 4 – 8m, pole spacing from 25 – 45m

*upon request available also modified optics C without back spill light

Optic O (with XPL LEDs)
Wide beam optics (IESNA TYPE II) optimised for long pole distances, pedestrian & bike paths
Pole height from 4 – 9m, pole spacing from 30 – 55m
 

Optic M (with XPL LEDs)
Forward-throw beam optics (IESNA TYPE IV) optimised for wide outdoor areas and parking lots
Pole height from 6 – 12m, pole spacing from 15 – 25m