Electrical characteristics

  • 220 – 240 V (50 – 60 Hz) input
  • 110 – 277 V input voltage range upon request
  • Power factor at full load more than 0,95
  • Total harmonic distortion (THD) ≤ 8%
  • Up to 99 % driver efficiency at full load with the Philips Xitanium LED driver
  • Dimming options: Lumistep, Line switch, DALI, 1 – 10 V and Dynadimmer
    (autonomous dimming) upon request
  • 6 kV differential mode and 8 kV common mode standard surge protection. 10 kV surge protection upon request
  • Protection class I or II

Mechanical characteristics

  • Housing made of aluminium (die casted housing)
  • Top pole or side entry. As a standard equipped with a 60 mm pole connector, 76 mm also available
  • Possibility to change the inclination from -15° up to +15° in increments of 5°
  • A cable upon request
  • Anodized finish and dust painted with epoxy paint & thermal treatment to ensure long-term environmental protection against all weather conditions. RAL 9006 or other upon request
  • Tempered cover glass
  • All screws are made of stainless steel
  • All gaskets are made of ozone and UV resistant silicone for IP66 protection
  • Certified for IK10

LED street light OP was designed for robust handling in different kind of environments. OP street lights are IK10 and IP66 certified. This means they can handle high impact resistance and high water and sand resistance. Additionally OP street light can be opened fully without tool requirements and serviced as lighting maintenance companies are used to do. Housing is fully die casted aluminum housing with toughened high visual light transparent glass.

Made in EU.

Luxtella OP luminaire - presentation movie

Testing of Luxtella OP luminaire

Optical characteristics

  • Standardly we are using PMMA that is 100% UV resistant which prevents against yellowing over the entire life time of the lenses.
  • Photometric files are available upon request.
Optic A
Optimised for ME and S road classes and narrow roads (IESNA TYPE II)
Pole height 4 – 6m, pole spacing from 20 – 30m (S classes), and height from 7 – 12m, spacing from 30 – 40m (ME classes)

 

Optic G
Optimised for ME road classes and wider roads (IESNA TYPE III)
Pole height from 7 – 12m, pole spacing from 25 – 45m

 

Optic C
Optimised for S road lighting classes with narrow roads (IESNA TYPE II/III)
Pole height from 4 – 8m, pole spacing from 25 – 45m

 

*upon request available also modified optics C without back spill light

Optic N

 

Wide beam optics (IESNA TYPE II) optimised for long pole distances, pedestrian & bike paths

 

Pole height from 4 – 9m, pole spacing from 30 – 55m

Optic L

 

Forward-thrown beam optics (IESNA TYPE IV) optimised for wide outdoor areas and parking lots

 

Pole height from 6 – 12m, pole spacing from 15 – 25m