LED FLOOD LIGHTS

Electrical characteristics

  • 220 – 240 V (50 – 60 Hz) input
  • 110 – 277 V input voltage range upon request
  • Power factor at full load more than 0,95
  • Total harmonic distortion (THD) ≤ 8%
  • Up to 99 % driver efficiency at full load with the Philips Xitanium LED driver
  • Dimming options: Lumistep, Line switch, DALI, 1 – 10 V and Dynadimmer       (autonomous dimming) upon request
  • 6 kV differential mode and 8 kV common mode standard surge protection. 10 kV surge protection upon request
  • Protection class I or II

Mechanical characteristics

  • Housing made of aluminium
  • Hanging connector is designed for metal wires diameter from 4 – 12 mm
  • Possibility to change Inclination and to rotate the lamp for 360°
  • Equipped with connecting electrical cable 8 m, longer/shorter cables upon request
  • Finish made of anodisation and dust painted with epoxy paint thermal treatment to ensure long-term environmental protection against all weather conditionds. RAL 9006 or on upon request
  • All screws are made of stainless steel
  • All gaskets are made of ozone and UV resistant silicone for IP66 protection

Optical characteristics

  • Standardly we are using PMMA that is 100% UV resistant which prevents against yellowing over the entire life time of the lenses.
  • Polycarbonate lenses ensure high impact resistance.
  • Photometric files are available upon request.

Optic I

95% optical efficiency

67deg viewing angle

Narrow symmetrical beam

Suitable for very high installations

Optic J

92% optical efficiency

103 deg viewing angle

Wide symmetrical beam

Suitable also for lower installations heights

Optic K

91% optical efficiency

63 / 115 deg viewing angle

Aisle asymmetrical beam

Suitable to illuminate isles between warehouse racks and corridors