Electrical characteristics
- 220 – 240 V (50-60 Hz) input
- 110 – 277 V input voltage range upon request
- Power factor at full load more than 0,95
- Total harmonic distortion (THD) 8%
- Up to 99 % driver efficiency at full load with the Philips Xitanium LED driver
- Dimming options: Lumistep, Line switch, DALI, 1-10 V and Dynadimmer (autonomous dimming) upon request
- 6 kV differential mode and 8 kV common mode standard surge protection. 10 kV surge protection upon request
- Protection class I or protection class II
Mechanical characteristics
- Lanterns are made of casted aluminium
- With additional fixing adapter installation options can increase
- Products are equipped with a 0,5 m connecting electrical cable
- Housings are dust painted with epoxy paint thermal treatment to ensure long-term environmental protection against all weather conditions.
- All screws are made of stainless steel
- All gaskets are made of ozone and UV resistant silicone for IP65 protection
LU luminary is suitable for modern city centers, public parks, neighborhoods and similar areas where light is dispersed evenly around the lighting pole.
Optical characteristics
- Diffusor is made of UV resistant PC material and ensures good light transmittance.
- Optionally light can be supplied with milky diffusor.
- Photometric files are available upon request.
- Both symmetric and asymmetric lenses can be applied.
- Luminary LU can be directly installed on poles with 60mm diameter.
| Optic G |
| Optimised for ME road classes and wider roads (IESNA TYPE III) |
| Pole height from 7 – 12m, pole spacing from 25 – 45m
|
| Optic S |
| Symmetrical lighting distribution shining away from the pole. |