- 220 – 240 V (50 – 60 Hz) input
- 110 – 277 V input voltage range upon request
- Power factor at full load more than 0,95
- Total harmonic distortion (THD) ≤ 8%
- Up to 99 % driver efficiency at full load with the Philips Xitanium LED driver
- Dimming options: Lumistep, Line switch, DALI, 1 – 10 V and Dynadimmer
(autonomous dimming) upon request - 6 kV differential mode and 8 kV common mode standard surge protection. 10 kV surge protection upon request
- Protection class I or II
- More than : 130 lm/W
Mechanical characteristics
- Housing made of aluminium
- Top pole or side entry. As a standard equipped with a 60 mm pole connector, 76 mm also available
- Possibility to change the inclination from -15° up to +15° in increments of 5°
- As a standard equipped with a 0,5 m connecting cable, or longer cable upon request
- Anodized finish and dust painted with epoxy paint & thermal treatment to ensure long-term environmental protection against all weather conditions. RAL 9006 or other upon request
- Option with cover tempered glass available
- All screws are made of stainless steel
- All gaskets are made of ozone and UV resistant silicone for IP66 protection
- Certified up to IK10
Optical characteristics
- Standardly we are using PMMA that is 100% UV resistant which prevents against yellowing over the entire life time of the lenses.
- Polycarbonate lenses ensure high impact resistance.
- Photometric files are available upon request.
| Optic A |
| Optimised for ME and S road classes and narrow roads (IESNA TYPE II) |
| Pole height 4 – 6m, pole spacing from 20 – 30m (S classes), and height from 7 – 12m, spacing from 30 – 40m (ME classes)
|
| Optic G |
| Optimised for ME road classes and wider roads (IESNA TYPE III) |
| Pole height from 7 – 12m, pole spacing from 25 – 45m
|
| Optic C |
| Optimised for S road lighting classes with narrow roads (IESNA TYPE II/III) |
| Pole height from 4 – 8m, pole spacing from 25 – 45m
*upon request available also modified optics C without back spill light |
| Optic N
Wide beam optics (IESNA TYPE II) optimised for long pole distances, pedestrian & bike paths
Pole height from 4 – 9m, pole spacing from 30 – 55m |
| Optic L
Forward-thrown beam optics (IESNA TYPE IV) optimised for wide outdoor areas and parking lots
Pole height from 6 – 12m, pole spacing from 15 – 25m |