luxtella | LED Street Light – STREET | luxtella
Luxtella STREET lights are one of the best lm/W lights available on the market. They are suitable for street lighting applications, road lighting application, for walkways, parks, bicycle ways. Luxtella street lights have become famous around the world because of this STREET model.
13802
page-template,page-template-full_width,page-template-full_width-php,page,page-id-13802,ajax_fade,page_not_loaded,,qode-title-hidden,qode-theme-ver-10.1.1,wpb-js-composer js-comp-ver-5.0.1,vc_responsive

Electrical characteristics

  • 220 – 240 V (50 – 60 Hz) input
  • 110 – 277 V input voltage range upon request
  • Power factor at full load more than 0,95
  • Total harmonic distortion (THD) ≤ 8%
  • Up to 99 % driver efficiency at full load with the Philips Xitanium LED driver
  • Dimming options: Lumistep, Line switch, DALI, 1 – 10 V and Dynadimmer
    (autonomous dimming) upon request
  •  6 kV differential mode and 8 kV common mode standard surge protection.10 kV surge protection upon request
  •  Protection class I or II
  • More than : 130 lm/W

Mechanical characteristics

  • Housing made of aluminium
  • Top pole or side entry. As a standard equipped with a 60 mm pole connector, 76 mm also available
  • Possibility to change the inclination from -15° up to +15° in increments of 5°
  • As a standard equipped with a 0,5 m connecting cable, or longer cable upon request
  • Anodized finish and dust painted with epoxy paint & thermal treatment to ensure long-term environmental protection against all weather conditions. RAL 9006 or other upon request
  • All screws are made of stainless steel
  • All gaskets are made of ozone and UV resistant silicone for IP66 protection
  • Certified for IK10
more characteristics about leds

Optical characteristics

  • Standardly we are using PMMA that is 100% UV resistant which prevents against yellowing over the entire life time of the lenses.
  • Polycarbonate lenses ensure high impact resistance.
  • Photometric files are available upon request.
Optic A (with XTE LEDs)
Optimised for ME and S road classes and narrow roads (IESNA TYPE II)
Pole height 4 – 6m, pole spacing from 20 – 30m (S classes), and height from 7 – 12m, spacing from 30 – 40m (ME classes)

 

Optic G (with XPL and XTE LEDs)
Optimised for ME road classes and wider roads (IESNA TYPE III)
Pole height from 7 – 12m, pole spacing from 25 – 45m

 

Optic C (with XPL and XTE LEDs)
Optimised for S road lighting classes with narrow roads (IESNA TYPE II/III)
Pole height from 4 – 8m, pole spacing from 25 – 45m

 

*upon request available also modified optics C without back spill light

Optic N (with XPL LEDs)

 

Wide beam optics (IESNA TYPE II) optimised for long pole distances, pedestrian & bike paths

 

Pole height from 4 – 9m, pole spacing from 30 – 55m

Optic L (with XPL LEDs)

 

Forward-thrown beam optics (IESNA TYPE IV) optimised for wide outdoor areas and parking lots

 

Pole height from 6 – 12m, pole spacing from 15 – 25m